Brett Chappell PLS
Member
Dear Javad Community,
I am performing an elevation survey of 66 monitoring points at a closed garbage site.
The site is 0.8 miles square with 30' of fill above surrounding roadways. This is a 2 part survey. Part 1 will survey the points with digital level equipment. Part 2 will survey the points using GPS, in my case using a Triumph LS with T2 Base. I plan on performing Part 1 first and then localize on a few exterior points and an interior point for Part 2.
My client is interested in the differences between the two surveys to determine which technique to use going forward.
The accuracy requirements have not been spelled out so I consider this a test to optimize RTK
results for a 3-5 minute session. That would make it a 1.5-2 day RTK vs. 5 Day Digital Level survey.
My questions:
1. I would like to know the best settings and occupation time using the Triumph LS.
2. Are there post processing techniques that can optimize the RTK results.
3. Should I use the US satellites only or multiple systems?
Please add any additional suggestions.
Thank you for your time.
I am performing an elevation survey of 66 monitoring points at a closed garbage site.
The site is 0.8 miles square with 30' of fill above surrounding roadways. This is a 2 part survey. Part 1 will survey the points with digital level equipment. Part 2 will survey the points using GPS, in my case using a Triumph LS with T2 Base. I plan on performing Part 1 first and then localize on a few exterior points and an interior point for Part 2.
My client is interested in the differences between the two surveys to determine which technique to use going forward.
The accuracy requirements have not been spelled out so I consider this a test to optimize RTK
results for a 3-5 minute session. That would make it a 1.5-2 day RTK vs. 5 Day Digital Level survey.
My questions:
1. I would like to know the best settings and occupation time using the Triumph LS.
2. Are there post processing techniques that can optimize the RTK results.
3. Should I use the US satellites only or multiple systems?
Please add any additional suggestions.
Thank you for your time.