Randy Rhodes
Member
Ok, my ls has started running very slowly in switching from one screen to another. i am now deleting the project files to see if this helps. any other suggestions?
thanks
thanks
SLOOOOOW
- Thread starter Randy Rhodes
- Start date
Nate The Surveyor
Well-Known Member
Suggestion:
Reboot. Hold the on off key, till it shuts down, and restart it.
N
Reboot. Hold the on off key, till it shuts down, and restart it.
N
Randy Rhodes
Member
I think cleaning out the files may have helped, i will know later today. before this i have Rerererebooted wih no effect.
Nate The Surveyor
Well-Known Member
I have been thinking of all the things it might be, (and I'm not on the support team, so my ideas are really just guesses, of varying quality!) Depending on WHAT is in your unit, ie, old files, with old file structures, you could have errors in some old data bases. The idea of backup ALL the files, in your unit, and then just put back what you need, will possibly help. Sounds like you are headed that way already. But, I do know that alot has changed in the LS, in the last year.
It is a product in development... which in my opinion is good.... because it means progress.
But, it has hazards too, such as this issue you have raised.
Worst case, maybe you would have to completely clean out your unit, and put back the coords, as design coords, and continue your job. However, get better advice than mine, before doing that.
N
It is a product in development... which in my opinion is good.... because it means progress.
But, it has hazards too, such as this issue you have raised.
Worst case, maybe you would have to completely clean out your unit, and put back the coords, as design coords, and continue your job. However, get better advice than mine, before doing that.
N
Last edited:
Randy Rhodes
Member
OK, deleting the old files really helped. now how do you put a project back in the ls ?
If deleting old projects helped there may have been some DPOS task in one of those projects that was active and trying to process.
To restore a Project Archive: Collect>Project>Unpack Archive Project or Files>Unpack Archived Project
To restore a Project from a Full Backup: Files>Full Backup and Restore>Restore from Existing Backup>One Project Only
Randy Rhodes
Member
ok, its restored but not showing up on the project list, in fact nothing is is showing up on the project list. i love this machine ,but some days it makes me feel like a total idiot.
Randy Rhodes
Member
a preponderance of files seemed to be the problem. thank you guys for your help.
Nate - If you had a Thor helmet and pigtails you would have the coolest photo on here by far. The ls could be the hammer.
Nate - If you had a Thor helmet and pigtails you would have the coolest photo on here by far. The ls could be the hammer.