Stake line or point

[Gregory]

Is there a way that when I do stake line or stake point that I can just type in the point number without having to go through filter list? When I click stake line by two points and I already know the number, I just want to type in the point number and move on.\
Thanks,
Gregory

 

[Adam]

Use the target white box.

 

[Gregory]

This will let me type the point number rather than going to a different screen? When I click Stake line by two points, on that same screen I just want to type the point number on the same screen.

 

[Adam]

Select Target Name white box and you will be prompted Key in or Select from list, pick key in. Then anytime you tap the target white box the keyboard will be displayed.

 

[Gregory]

Got a screenshot?

 

[Matthew D. Sibole]

When staking a line by two points you can use a long press of the boxes that show the point and it will open the keyboard to enter the numbers you wish.

 

[Gregory]

How does that work for Stake line?

 

[Gregory]

Awesome, Thanks!

 

[Nate The Surveyor]

Gregory something else I'm learning to do is use the distance filters and that keeps it from having all the coordinates available just tell it you only want it to be able to see the points within say 200 feet then you can pick from the list real fast. It's awesome.

 

[Nate The Surveyor]

Select Target Name white box and you will be prompted Key in or Select from list, pick key in. Then anytime you tap the target white box the keyboard will be displayed.

If you wish to change it, from "key in" to list", do you select "none", then go back, and select "target" then select "list"?

 

[Adam]

Yes it prompts when activated as a whitebox.

 

[Nate The Surveyor]

So to change it back and forth we always have to turn it off and then turn it back on to change its modes thanks