Garrett Dendy
Member
Is there a way to change the stake out direction from azimuth to left/right & come/go?
Garrett
Garrett
Stake out
- Thread starter Garrett Dendy
- Start date
Nate The Surveyor
Well-Known Member
If you have it all set how you like, but need a little more info, hit the action button on the left. Sometimes it has what you need.
Darren Clemons
Well-Known Member
If you do any marking lines don't forget the handy new CTT (course to target) arrow. It's great. Before I always had to read the left/right which gave me a distance I was off the line.. Then I had to remember if I'd put the numbers of the line in from front/back or back/front. Now just notice the distance on the left right but don't have to worry about about left/right. The arrow will point you which way you need to go regardless of if you're facing the to point or the from point.
Garrett Dendy
Member
Yes, that 3d view is pretty awesome. I staked out 13 acres this morning, at 50 intervals. The stake out is super user friendly. I'm still learning things every time I go out.
Garrett
Garrett
Bob Farley
Member
New question on point staking. In the previous Jfield if you had a point with a weird elevation, you could toggle over to points on the main screen and enter an approximate value. The new Jfield will not allow you to "type in" an elevation. Sometimes my office software will enter an exponential value for an intersection point or a radius point.
Any ideas?
Thanks
Any ideas?
Thanks
You can still edit a design point's coordinates. Use the "Manual" option to type in new coordinates.