Trouble in Stake mode

[Gregory]

I keep having trouble in stake mode. Whether it is in stake line or point mode, the screen will show CDF several times for extended periods and when I click the RTK screen it shows I have all 6 RTK engines fixed; but it messes with my stake result. It also does it when I am in collect mode and then after awhile it will eventually crash. I am using the Beta version, so expect glitches but I was hoping you could look into it. Another thing is when I tap start to collect the screen flashes several times before going over to the recording epoch screen. I am using J-field version 2.0.2.11. Also, In stake line mode, is there away you could offer to display station an offset of every perpendicular result like in the case when you are coming up to a angle in the line you are staking and you are staking offsets to said line?
Thanks,
Gregory

 

[Nate The Surveyor]

After every update do a hard reboot hold the on button down for about 30 seconds so it turns off and then restart it. There are things that change between various versions and it needs a hard reboot after most updates.
This won't fix everything but it certainly has helped me several times.