Joe Paulin
Well-Known Member
How does it get the base data for post processing?
When are you going to change the ad?
- Thread starter Nate The Surveyor
- Start date
Matthew D. Sibole
Well-Known Member
It stores the data in the RTCM3 stream and uses it for post processing.
Joe Paulin
Well-Known Member
Well done Javad Team, Genius!! If using TCP corrections over the internet, will it do the same thing?
Matthew D. Sibole
Well-Known Member
It will
Nate The Surveyor
Well-Known Member
Rtcm3 stream?
'Splain that, fer those of us who speak slower, and ennunciate every syllable...
Nate The Surveyor
Well-Known Member
Down here in Arkansas, a stream is a creek, when it's flowing..... 
Matthew D. Sibole
Well-Known Member
The RTCM3 stream is the data stream that the base transmits whether it is by UHF or TCP or VRS. Other manufacturers may use different formats such as CMR and CMR+ for example.
Nate The Surveyor
Well-Known Member
Ok, then will the RTPK run over the UHF radio?
This is my core question.
N
This is my core question.
N
Matthew D. Sibole
Well-Known Member
It will work with UHF and TCP.
I don't think a final decision has been made but I believe that's the direction everyone is leaning towards.
Yes it will work by uhf provided you have corrections coming in during the observations.
For post processing after communication outage will require Bluetooth or internet download.
Robert Jordan
Member
I used it all last week on my LS running new release software. It’s fantastic. Just check the “allow post-processing on this device” box. I think it’s under edit group settings? (memory is foggy on exact wording and location). It allowed me to leave difficult sites earlier with similar comfort levels.
Last edited:
Jim Frame
Well-Known Member
If you figure out where it is, let us know. I wasn't able to find it.
Matthew D. Sibole
Well-Known Member
For right now it is only on the LS+. We are discussing options with this new feature.
Robert Jordan
Member
Matthew, it works well on my LS with T2 base.
Please be aware that while it may currently appear on your LS, this will likely be a paid upgrade option in the near future, so it may disappear eventually.
Robert Jordan
Member
I'm running J-Field 3.0.8.365
Setup --> Edit Action Group --> Options --> check "Enable Post-Processing on the Device"
Robert Jordan
Member
Just giving me a little taste to get me hooked! LOL Looks like it worked.
Jim Frame
Well-Known Member
Mine is at 3.0.6.249, and says "Your unit is already updated." I'm thinking the version you're using is pre-release, but I no longer remember where on the website to find release information.