Recent content by Matthew D. Sibole

  1. Matthew D. Sibole

    Sudden Loss of Workable Fix in Open

    There is no way to clear NVRam on an LS. A hard reboot is required.
  2. Matthew D. Sibole

    Mix of Coordinate System datums

    You would have to do a one point localization.
  3. Matthew D. Sibole

    Mix of Coordinate System datums

    NGVD29 does not have a Geoid associated with it. However, I would use Geoid18 and adjust elevations to a known benchmark.
  4. Matthew D. Sibole

    Sudden Loss of Workable Fix in Open

    I had issues this morning using my T3 over TCP. I stopped the base and cleared NVRam and it went back to normal. I know that isn’t easy for everyone using UHF but I was able to do this being 3000’ from my base over tcp.
  5. Matthew D. Sibole

    How to use average points, when you get 2 that are too close?

    Then you can just choose to export points on your averages page. When you export you can tell it to export points on specific pages.
  6. Matthew D. Sibole

    How to use average points, when you get 2 that are too close?

    You can also add a prefix such as a 1 or 2. That would make the average of point 100, 101 and 102 to be 1100 and so on. Then you can use the point number filter 1100..1900 and grab all clusters.
  7. Matthew D. Sibole

    RAMS not connecting

    I can connect to RAMS through my phone with no issues.
  8. Matthew D. Sibole

    Triumph LS Plus and Triumph 3 new user

    First off Harold, I commend you for jumping in with both feet! We do recommend getting a FCC license for any UHF radio that is 1 watt or more. The T3 should have the UHF antenna on it if you plan to use the internal radio of the T3. I also recommend using the external antenna on the LS if...
  9. Matthew D. Sibole

    Old rtpk vs. New rtpk

    I took a new video last week with the current RTPK and how I use it.
  10. Matthew D. Sibole

    T1 - Satellite icon flashing RYG

    Phillip has the right answer. Upload the new firmware and it should be ok.
  11. Matthew D. Sibole

    known base points and DPOS

    John, Give me a call tomorrow. I’ll walk you through a couple of things.
  12. Matthew D. Sibole

    Reboot after base/rover setup

    Instead of rebooting your LS go to either the WiFi icon or the cellular icon from the Home Screen and go to RTN at the bottom. Hit stop and apply and the. Hit start and apply and it should start working.
  13. Matthew D. Sibole

    Reboot after base/rover setup

    Are you using UHF or TCP?
  14. Matthew D. Sibole

    DPOS not processing this AM

    I have had 3 customers not be able to DPOS today. It hangs at 40% downloading cors.
  15. Matthew D. Sibole

    Rebooting to get the shot...

    What are the settings that you are working with?
Top