app working with ios 8.02?

[Jason Scott]

yes. all my network settings are still there - ssid, password, etc.

 

[Shawn Billings]

I wonder if Matt might be able to save a script file and send it to you? If he has the magic combination, it should allow yours to work as well.

 

[Matt Johnson]

You can try this. I attached the a script file from my T2 that I saved. To load press "Load Script" in Net View. The password for the app is "Apple".

 

[Matt Johnson]

Yuri the issue with "apple" as the password only happens when I use the default iOS keyboard. When I use the SwiftKey keyboard "apple" will work as the password. There must be some bug that is changing "apple" with the default keyboard. I was careful not to let it autocorrect it to "Apple".

 

[Jason Scott]

Thanks. about half of the script loaded and then it looks like it timed out and i got a bunch of errors.

Also it disconnected the receiver from netview while the script was running and it takes me a couple of tries to reconnect.

I went through it 4 times and the same thing happened everytime.

none of the parameters on the networking tabs were changed.

 

[Jim Campi]

There is a problem with iOS8 networking. Have you tried resetting the network connections? If not try this.

http://www.redmondpie.com/how-to-fix-ios-8-wifi-issues-on-iphone-and-ipad/

I had a similar problem attempting to get my iPhone to connect to LS...it resolved the problem instantly.

 

[Jason Scott]

Thanks. Jim. I tried that but it still didn't work.

 

[Jim Campi]

I did something slightly different when setting up the ip and gateway. I think the instructions have them set the same and that didn't make sense at the time, so I changed the gateway - however I'm not a network administrator. It worked fine.

 

[Jason Scott]

Thought that was strange too. I changed it as you suggested. Didn't work. Then I went back and manually set everything in netview to their defaults. changed settings in app. didn't work.

Then i redid the greis commands as listed in the app instructions, and reset the app defaults. still didnt' work.

 

[Jim Campi]

Do you have any device that accesses the T2 via wifi (LS for example)?

 

[Jason Scott]

I finally got my phone to connect to my receiver with Yuri's help. last week I have been ablet to pull files off of the receiver and submit them to DPOS and OPUS.

I collected a file yesterday and I can download it to the phone but DPOS will not process it. It looks like it uploads all the way and then the uploading screen starts over at 0% and just stays there.

I sent the same file to opus and it came back just fine. Is anyone else experienceing problems with DPOS?

 

[Jim Campi]

I'm using 8.1 and it works fine.

I installed the iOS app about 4-5 weeks ago. Initially DPOS would not process.

 

[Yuri Noyanov]

Init Parameters doesn't affect to WiFi parameters. So reset doesn't reset WiFi settings. Only NetView settings setup the parameters.
Then you have problems with WiFi connection to iPhone/iPad, please click blue i in circle icon near connected WiFi network name to see result IP it got.
Then check that DHCP server is turned on ad DHCP client is turned off in NetView settings.