DPOS

[Sean Joyce]

Just want to clarify if there are issues with DPOS.
I am trying to have DPOS process my base file and 1 PPK test point.
The files upload and gets to 50% processing... and then hangs up.
Has anyone else been experiencing this?
At this point I would just settle for processing the base.

 

[Nate The Surveyor]

I have a week or so old file, from my rainy day, that I am still trying to get a dpos on

 

[Sean Joyce]

Okay thanks Nate. I did read that you had some trouble too. The one thing that I did that might be causing trouble was I kept the base at the usual 30 second record rate and
the PPK point was collected at one second.
I didn't see a way to separate the base file and the PPK data. In DPOS settings I told it to process the base only but the PPK file stayed.

 

[Matt Johnson]

Okay thanks Nate. I did read that you had some trouble too. The one thing that I did that might be causing trouble was I kept the base at the usual 30 second record rate and
the PPK point was collected at one second.
I didn't see a way to separate the base file and the PPK data. In DPOS settings I told it to process the base only but the PPK file stayed.

To process the base coordinate you need to choose "Base-Processing + Base Shift". Did you also uncheck "Process all Points with raw GNSS files"? The default recording rate for both the base and rover is now 1 Hz.

 

[Sean Joyce]

I did uncheck the process all points with raw GNSS but did not use Base processing +base shift so I will give that a try.
I figured I screwed up by forgetting to change the recording rate.
Thanks Matt.