Failure to connect with iPhone

Ralph Dominguez

New Member
I have been using JMT for years with my iPhone and find the process easy and very productive.

A couple of days ago, I attempted to connect via WIFI, as usual, but the T-2 does not show up as an available network on my iPhone. I had to collect static data and then download it with Network and Modem on my desktop.

The only thing I have changed recently is the ability to use my WIFI hotspots to receive corrections with TCP. Should that have had an effect on the ability to connect via WIFI with JMT?

Thanks for your help.
 

Matt Johnson

Well-Known Member
5PLS
If you configured the T2 to connect to a hotspot then this is the problem. The T2 WiFi must be in adhoc mode to connect to JMT. Netview and Modem has a Action to automatically configure this:

9229
 

Matt Johnson

Well-Known Member
5PLS
The TCP Base can be configured with Base/Rover. WiFi settings need to be changed in Netview and Modem. The only way to change them through JField would be through the GREIS terminal. I’m not sure which settings you are asking about.
 
Top