hi

[Randy Rhodes]

ok, can i change the instrument height on the base before i dpos it ? i forgot to when i set it up.

 

[Adam]

Sure, just edit the height in the points screen for the base point. Use the pencil icon to get to it.

 

[Randy Rhodes]

thanks
don't let anyone tell you you get smarter as you get older.

 

[Matt Johnson]

Just a note, the edit point screen is not currently updating the height in the raw GNSS file so if you send it to the DPOS web portal the height would need to need manually input there.

 

[Nate The Surveyor]

I'd much like to be able to change antenna height, on the rover, after, and during the observation, but before storing. Of course, we can go to the points screen, and edit a shot. But, while waiting on an observation, we have nothing else to do.... So it's a good time to do it.
Thanks
N

 

[Nate The Surveyor]

I'd much like to be able to change antenna height, on the rover, after, and during the observation, but before storing. Of course, we can go to the points screen, and edit a shot. But, while waiting on an observation, we have nothing else to do.... So it's a good time to do it.
Thanks
N

 

[Matt Johnson]

I'd much like to be able to change antenna height, on the rover, after, and during the observation, but before storing. Of course, we can go to the points screen, and edit a shot. But, while waiting on an observation, we have nothing else to do.... So it's a good time to do it.
Thanks
N

This is already on the to do list.