J-Field V2 Camera Attach problem

[Robert P Stenerson]

Heads up for developers for the camera functions; yesterday, I did some testing using Version 2.0.0.213, and was using the new Collect, Action, Attach button (2nd from Top Right side before pressing Accept), and after taking two previous RTK points, and attaching a front face camera photos, on my third RTK point the camera would not work, the camera page would come up, but there the image field was dark and I couldn't take a photo. I pressed the Camera Reset, but to no avail. I had to press Home to return back to the Collect Action screen to accept the point. The attach camera photo didn't function for the rest of my session.

I uploaded my project Hometest_V2 to support.

Thanks,
Rory

 

[Matt Johnson]

There are some problems with the camera driver which aren't easily fixable that occasionally causes problems like this. When this happens you would need to restart the LS to get the camera working again.

 

[Nate The Surveyor]

As I read what Shawn above just replied, I have had a number of problems, with updates.
So, as. A normal procedure, after each update, it's good to do a hard reboot. While it's on, press the on button for about 30", until it shuts off.
Then, turn it back on.
If course, not all updates require this, but not knowing for sure, it's just a good procedure.
Good habit.
That has saved me a number of problems.