Localization Screen not showing chosen Points

[Brett Chappell PLS]

I was out in the field today and went to localize a couple of points I RTK'd. The Localization screen did not show the points I selected. This was the case for the Surveyed and Design columns. Anyone else have this issue?

This started occurring for me in V2.0.0.219

I sent the project file to Support
-Brett

 

[Nate The Surveyor]

I have found that it helps to set current your state plane coordinate page before you start trying to localize.
Then, when you want to see your design points, to localize on them, you will reset the filter. Now you can see them, and select them.

 

[Nate The Surveyor]

My page 0 is usually spc. Also, my page 0 is where my base station coord is. I set this current.
Then, page 1 has my design coords, that I want to localize on.
It is set to unknown, when inputting the design coords.
Then go to localize. Right side, spc

 

[Matt Johnson]

Brett were you still not able to get it to work after starting a new project?

A lot of changes have been made to localization for next major release of J-Field. They will be more user friendly in this next update.

 

[Brett Chappell PLS]

Thanks Nate.
The problem was not localization itself. The problem was that the points I selected were not showing up in the screen for pairing. Matt was able to recreate the problem on my machine through the interweb.

Matt,
I started a new project and the problem still existed. I updated to the latest Public Version and the problem still existed. I am out for the rest of the day. Hopefully a solution will come about.

Thanks,
Brett

 

[Matt Johnson]

Hi Brett,

Vladimir has implemented some bug fixes in J-Field Pre-release version 2.0.0.313. Please try this version to see if it fixes the problems you had.

 

[Brett Chappell PLS]

Hi Matt,
The update took th points and I was able to Localize. Thanks for all the help and quick support.