nusouthsc
Active Member
AdamStart with the rover. If it doesn't fix the issue reboot and restart the base.
Just out of curiosity, is the issue being experienced with the Delta 3 base setup?
AdamStart with the rover. If it doesn't fix the issue reboot and restart the base.
YesAdam
Just out of curiosity, is the issue being experienced with the Delta 3 base setup?
Matt,GNSS firmware version 4.2 for the LS/LS+ should fix the cycle slip issue which causing the receiver to struggle to fix.
How long did this last? Did you try rebooting the LS too?Not sure if this is related, but Tuesday afternoon I was unable to get the engines to use anything but BeiDou satellites. Tried the usual suspects, auto setup engines, reset engines, checked that all constellations were on in the settings. Everything reduced fine, and the raw files have recorded data from GPS, GLONASS, and Galileo as well, so not sure why the engines were doing this.
View attachment 11961View attachment 11962
Maybe 45 minutes after I noticed it. I was getting decent rtpk and was comfortable locating the last two points of the day so I didn't bother restarting. I was a long way from the base and didn't want to risk it not picking the radio back up.How long did this last? Did you try rebooting the LS too?
Nope, didn't know that did anything.Out of curiosity, did you reset tracking as well (long press Reset Engines)?