Garrett Dendy
Member
During start up when you set your parameters for your base setup, do you leave your elevation offset as ZERO and the JAVAD system is smart enough to give you proper elevations or are you suppose to input the height of base plus the height of the 1/4 to 5/8 adapter, (and is the adapter 0.23m?)?
The majority of the time, I am not really worried about the Z value, but when I work adjacent to the TN-Tombigbee Waterway, I need correct elevations to tie to their easements which are a certain contour elevation, which was derived from NAD27 and NGVD 29. And also for any future construction and engineering staking.
Thanks,
The Still Newbie
Garrett
The majority of the time, I am not really worried about the Z value, but when I work adjacent to the TN-Tombigbee Waterway, I need correct elevations to tie to their easements which are a certain contour elevation, which was derived from NAD27 and NGVD 29. And also for any future construction and engineering staking.
Thanks,
The Still Newbie
Garrett