What is your current coordinate system? Try setting it to WGS84 and see if that fixes it.
Feature Request
- Thread starter Gregory
- Start date
What is your current coordinate system? Try setting it to WGS84 and see if that fixes it.
Have you done a hard reset by holding the On/Off button for 10 seconds?
I think this behavior related to camera initilization. So do you have in "What to Record" taking of any camera photo?
It could be some combination of settings. May be some old obsolete but internally used settings was imported from some old profile.
Could you send any even empty project to support?
Also you can try to recreate from scratch your Action profile.
Also you can try to recreate from scratch your Action profile.
Collect -> Project -> Send project to support
Mikhail Drakin
Developer
When camera is used, from time to time it crashes (either crashes the program, or just the camera seizes and produces black image and 2-second lags). This is known behaviour which up to date cannot be fixed. The probability of the crash depends on how actively you use the camera, and how often does it switch modes. In particular, having the "vial" whitebox active and saving camera images at start/at end will inevitably lead to crash. It is not recommended to use "at start/end" shooting together with vial whitebox.
However, this crash behaviour is random and only occurs from time to time. If some actions sequence leads to a crash every time, it is reason for investigation and probably for RMA.
Also, each time the camera is activated or its mode is changed, the screen flickers (as in your video) - it is also normal behaviour. So when you have saving camera images "at start/end" activated, your screen will flicker most times, especially when you save both front and bottom camera images.
However, this crash behaviour is random and only occurs from time to time. If some actions sequence leads to a crash every time, it is reason for investigation and probably for RMA.
Also, each time the camera is activated or its mode is changed, the screen flickers (as in your video) - it is also normal behaviour. So when you have saving camera images "at start/end" activated, your screen will flicker most times, especially when you save both front and bottom camera images.
Phillip Lancaster
Active Member
This request is not that important. Any way to to import a .dwg on a page and it keep the .dwg layer colors instead of page color?
This isn't possible yet, colors are currently only controlled by the page color.
Nate The Surveyor
Well-Known Member
Camera crash got me yesterday.
(not killing me, but it was while showing it off!)
And, we'd like MISSION PLANNING to be incorporated into the LS, so we can take a fast look at the LS and SEE when the good and bad times are.
thanks.
N
(not killing me, but it was while showing it off!)
And, we'd like MISSION PLANNING to be incorporated into the LS, so we can take a fast look at the LS and SEE when the good and bad times are.
thanks.
N
Nate The Surveyor
Well-Known Member
BTW, I am not asking for FULL mission planning, where you actually draw the obstructions, and it tells you the best time of day to hit that spot... (although that would be ok) What I want is that simple sheet, showing the best times of day, and worst. times of day.
Thanks.
Thanks.