When I look at my T2 through Netbrowser, it shows an IP address of 192.168.1.11, but when I look at the Jetpack's connected devices, it shows the T2 with an IP of 0.0.0.0. When I went in through Netview, I saw that on the TCPO tab all of the output settings were set to "none." (I have no idea how that got changed.) I revised the 8010 setting to RTK RTCM3 3.0 and applied the setting.
Here are my current WLAN and TCPO settings:
The Jetpack settings are still confusing me, as my interface doesn't look like the on in Matt's PDF. The port forwarding setup doesn't permit a range of ports to be entered. This is what I currently have:
But still no corrections coming through...