Few more comments based on working with Nate's T2:
1) make sure firmware is at least 3.7.9 (latest for today)
2) update OAF from the web to assure you have the latest one with BDS B1C enabled. Very old OAF enabled B1 only. The latest OAF will enable also BDS B1C and GPS L1C
3) B1C signals are being tracked by T2 by all rev. > 3 without any shift of frequency
4) shift is needed to track B1 in rev. 4-7. The number of B1 signals for now about 2 times larger than B1C, this is why it makes sense to shift the frequency.
5) after all done and still, no BDS, check with N&M their locking, and use in positioning are enabled
1) make sure firmware is at least 3.7.9 (latest for today)
2) update OAF from the web to assure you have the latest one with BDS B1C enabled. Very old OAF enabled B1 only. The latest OAF will enable also BDS B1C and GPS L1C
3) B1C signals are being tracked by T2 by all rev. > 3 without any shift of frequency
4) shift is needed to track B1 in rev. 4-7. The number of B1 signals for now about 2 times larger than B1C, this is why it makes sense to shift the frequency.
5) after all done and still, no BDS, check with N&M their locking, and use in positioning are enabled