Darren Clemons
Well-Known Member
out_2020-05-23-09-16-19.MP4
drive.google.com
out_2020-05-23-09-18-30.MP4
drive.google.com
I've tried painlessly to try and figure out a way to upload a video to this page but I can't get anything to work - even though I've got the file size down to 5 & 6MB.
Anyway, I've sent them to my google drive and attached a link, so hopefully that'll work if anyone wants to try viewing them.
They are very short videos on what my LS+ has been doing all week, ever since I got it back after the upgrade.
On any point in canopy, the satellites constantly "come in" and "drop out" - from 7 to 25 on this instance. I have also continually gotten a consistent flash of a CDF solution and, in these videos, I'm only 100' from my base.
We have gotten "some" very impressive, difficult shots this week and the weather here has been terrible with lots of rain and wet leaves several days, but there's no way, I don't believe, with the number of satellites dropping in/out like this and the radio link somehow going out in "patches", that things are functioning correctly.
I am using T1M bases (have tried 2 different ones) and none of this behavior happens with those bases and a non plus LS on standard GPS/Glonass firmware. Of course, there is a usual up down of satellites on that firmware of say, 8/11 or 9/12, but nothing like what I'm seeing on the plus unit.
In one of the videos, also notice my Hz count of the upsampling. It is staying at 1/5 very little on the plus unit. Most times it is at 1/4 or 1/3, even though I've "dialed down" the total number of signals to the recommended 43/33 setting (which in itself is a very confusing recommendation after just getting a processor and chip upgrade??)