New release of J-Field Software 2.0.5.9xx
- Thread starter Shawn Billings
- Start date
Sdrake14
Active Member
Yes my raw data is definitely set to record. And I'm toast. My machine is absolutely reacting badly to the update.
I'm seeing some of the same patterns. I've rebooted, cleared Nvram, restarted, cleared jobs, created new ones, etc.
So the consistent pattern is:
When I connect to base error: "error reading point from DB"
And just like Thompson's it always shows "STOP" on connect before I've started anything. I can not use position from "Auto", not working at all.
So I stop it, force a start with the point it wants returns errors: "Can't start corrections", & "Can't start output" and the start process does not complete. But I find that a point gets stored when I look in the data. (and one was stored by maching through it's automatic start..whenever...that I had no involvement in. The start base flow is just plain jacked. When I reconnect is shows "Stop"
If I select "stop & download" it returns the error: "Can't find GNSS file information" ...yea I guess since I can't find any raw data either....anywhere.
I'm seeing some of the same patterns. I've rebooted, cleared Nvram, restarted, cleared jobs, created new ones, etc.
So the consistent pattern is:
When I connect to base error: "error reading point from DB"
And just like Thompson's it always shows "STOP" on connect before I've started anything. I can not use position from "Auto", not working at all.
So I stop it, force a start with the point it wants returns errors: "Can't start corrections", & "Can't start output" and the start process does not complete. But I find that a point gets stored when I look in the data. (and one was stored by maching through it's automatic start..whenever...that I had no involvement in. The start base flow is just plain jacked. When I reconnect is shows "Stop"
If I select "stop & download" it returns the error: "Can't find GNSS file information" ...yea I guess since I can't find any raw data either....anywhere.
Nate The Surveyor
Well-Known Member
I did this update.
My t2 is num 720.
My LS is 435.
I've done some testing in my yard. I think I'm good... But I've not tried all functions.
My point is, it seems that internal components may vary, and this is something I'd like to know more about.
I'm on my 2nd LS. My 1st one was a higher serial num. It's sound card went bad, and they swapped me to an older unit.
My gut feeling is that it could be related to variations in build components. Users will need more info, if this is true.
Nate
My t2 is num 720.
My LS is 435.
I've done some testing in my yard. I think I'm good... But I've not tried all functions.
My point is, it seems that internal components may vary, and this is something I'd like to know more about.
I'm on my 2nd LS. My 1st one was a higher serial num. It's sound card went bad, and they swapped me to an older unit.
My gut feeling is that it could be related to variations in build components. Users will need more info, if this is true.
Nate
John and Sdrake14, did you update the GNSS firmware in the LS with J-Field? You should version 3.6.12.170808.
Nate, there are different versions of firmware dependant upon the hardware that is installed in the unit.
Charles Craft
Member
I am having the same problems. I had planed to use my base this week, but I can wait until this is sorted out a little. How do I find the thread, "my base got knocked off point"?
Charles Craft
Member
Do you still need some one to set up a base. It is 9:30 pm here but I can do it if I get word soon. 601 927 7772. I do not know much.
John Thompson
Well-Known Member
Just got home. Connecting to JSupport.
GNSS version 3.6.12.170808
125 141 551
RAMS password is Evers
GNSS version 3.6.12.170808
125 141 551
RAMS password is Evers
John Thompson
Well-Known Member
I turned my UHF radio on and also my Jetpack, so you should be able to use TCP or UHF.
Thanks, your unit disconnected from Remote Assistance for some reason when I was collecting the status. Can you try reconnecting?
John Thompson
Well-Known Member
Screen on the LS was frozen so I rebooted it. Should be back now.
J-Field release version 2.0.5.992 should fix the issue with Base starting.
Sorry, we didn't take into account that Triumph-2 with board revision older than 4 don't support the Base Guard feature.
In the releases before 2.0.5.990 ordering of the service information (RTCM 1029 message) was disabled by default. Now it always enabled.
In the J-Field 2.0.5.992 and higher for the Triumph-2 receivers with board revision < 4 after Base Start you will get warning message: "Can't order service message! Base Guard feature will not work!" and it should not interfere with normal operation.
Sorry, we didn't take into account that Triumph-2 with board revision older than 4 don't support the Base Guard feature.
In the releases before 2.0.5.990 ordering of the service information (RTCM 1029 message) was disabled by default. Now it always enabled.
In the J-Field 2.0.5.992 and higher for the Triumph-2 receivers with board revision < 4 after Base Start you will get warning message: "Can't order service message! Base Guard feature will not work!" and it should not interfere with normal operation.
Hi Michael,
Please affirm my understanding that after installing the JField update (2.0.5.992), I should expect to see see the warning message based on the following report:
Please affirm my understanding that after installing the JField update (2.0.5.992), I should expect to see see the warning message based on the following report:
-- Receiver Report Generated by -- NetView_Modem -- Version:1.2.1.1 --
Name: TRIUMPH2-00089
Id: 03V44M5DVIVQ43OU3JZ332SMO2
Vendor: JAVADGNSS
Firmware: 3.7.2 Aug,31,2017
Board: TRIUMPH2_3 <---
Model: TRIUMPH2
UpTime: 0d00h00m43s
Memory: 735.83 MB / 1.83 GB
Position:
Connections:
dev/blt/a Serial: COM3 (Bluetooth)
Name: TRIUMPH2-00089
Id: 03V44M5DVIVQ43OU3JZ332SMO2
Vendor: JAVADGNSS
Firmware: 3.7.2 Aug,31,2017
Board: TRIUMPH2_3 <---
Model: TRIUMPH2
UpTime: 0d00h00m43s
Memory: 735.83 MB / 1.83 GB
Position:
Connections:
dev/blt/a Serial: COM3 (Bluetooth)
Yes. (current version of GNSS FW 3.7.2 for Triumph-2 doesn't support the Base Guard feature for Board TRIUMPH2_3 and older)
Charles Craft
Member
Matt got my radio to appear to connect with my LS, but the LS will not fix. I switched to the MDOT system and it worked there. It just will not work with my base. A new update to JField came out last night. Do I need to update again? My s/n is 0298. 601 927 7772
I will be back in town tonight.
I will be back in town tonight.
Okay. Thank you, Michael.
One note, however, what I'm seeing (Release version) as being current is GNSS 3.6.12.17808.
One note, however, what I'm seeing (Release version) as being current is GNSS 3.6.12.17808.
Triumph-LS with 3.6.12.17808 does support the feature on its side, but old Triumph-2 with GNSS 3.7.2 doesn't.